Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Haddon Heights, NJ
Chimney cleaning in Haddon Heights typically costs $180-$320 for a standard sweep with NFPA 211 Level 2 camera inspection, and most jobs are completed in a single visit. Because virtually every chimney here is a century-old original masonry stack built for coal and wood, our crews arrive expecting deteriorated mortar, multi-flue configurations, and abandoned furnace flues that need inspection, not just the active fireplace flue. Call (856) 741-9572 for a written price before we start.
Why Haddon Heights Homes Are Different
Haddon Heights was platted in 1895 and built out almost entirely by the mid-1930s as a planned streetcar suburb. That means the housing stock is dense with Victorian, Colonial Revival, and Craftsman bungalows - almost all featuring original full-height brick masonry chimneys with clay tile liners now at or well past their rated service life. Our technicians rarely encounter a “young” chimney here.
South Jersey’s freeze-thaw cycling hits the soft, porous brick common in pre-1940 construction hard, accelerating mortar joint erosion and crown cracking year after year. The Delaware River valley proximity keeps humidity elevated, promoting efflorescence and accelerating interior flue-tile deterioration. And many homes have a capped-off second furnace flue running up the same stack - sealed at the top when the boiler was decommissioned, left unlined, and forgotten. Sweeps who inspect only the active flue miss the compromised secondary chase that can allow backdrafting or create a hidden carbon monoxide pathway.
Our Main Haddon Heights Services
Homeowners in Haddon Heights most often call us for chimney cleaning and repair work on these original masonry systems.
Chimney Cleaning & Sweep in Haddon Heights
We clean and inspect the active fireplace flue, the smoke chamber, and the capped-off furnace flue if present. Every visit includes a camera-scan inspection and documented photo record under Haven Standard Clause 4. Chimney Cleaning & Sweep in Haddon Heights covers Class I, II, and III creosote removal from these century-old clay tile systems.

Chimney Repair in Haddon Heights
Spalled flue tiles, eroded mortar joints, and cracked crowns are standard findings here. We quote crown repair, tuckpointing, and partial rebuilds in writing before work begins. Chimney Repair in Haddon Heights addresses what freeze-thaw cycling does to pre-1940 brick.

Fireplace Services in Haddon Heights
Firebox rebuilds, damper replacement, and smoke chamber parging for original coal-era fireplaces converted to wood or gas. We document the firebox condition with photos and provide a written scope and price before any work. Fireplace Services in Haddon Heights covers these century-old hearth systems.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Haddon Heights

The original crowns on Haddon Heights chimneys were poured concrete or mortar wash, never designed to survive a century of freeze-thaw cycling. South Jersey’s wet winters and the soft, porous brick common in 1895-1935 construction mean crown cracking and cap failure are nearly universal here. A proper cap keeps water out of multi-flue stacks where abandoned furnace flues create additional entry points, and crown repair prevents the water intrusion that destroys these chimneys from the top down. Chimney Cap & Crown work is where most Haddon Heights jobs start.
Crown Repair
Signs you need it
Cracks wider than 1/8 inch, pieces missing from the crown edge, or water staining on the interior firebox walls after rain.
What it costs in Haddon Heights
Crown repair runs $450-$850; full crown replacement is $1,200-$2,400 depending on chimney width and access.
How we do it
We grind out cracked areas, apply a bonding agent, and pour new high-strength crown mix sloped 2 inches minimum from the flue tile to the edge, then seal with a breathable waterproofing agent.
Cap Installation
Signs you need it
Rust streaks down the brick from a deteriorated cap, birds or debris in the flue, or water dripping into the firebox during storms.
What it costs in Haddon Heights
Single-flue stainless caps installed run $280-$550; multi-flue caps for Haddon Heights’ common dual-flue chimneys run $450-$850.
How we do it
We measure the flue tile or crown footprint, fabricate or source a Gelco or Olympia Chimney cap with minimum 5-inch mesh screening, and secure with masonry screws or a compression fit that won’t damage existing brick.
What Chimney Cap & Crown Costs in Haddon Heights
| Item | Typical range in Haddon Heights |
|---|---|
| Crown repair (crack sealing, partial rebuild) | $450-$850 |
| Full crown replacement | $1,200-$2,400 |
| Single-flue cap installation | $280-$550 |
| Multi-flue cap installation | $450-$850 |
Can a cracked crown wait until next season?
Small hairline cracks can be sealed, but anything that lets water reach the brick will accelerate freeze-thaw damage through a Haddon Heights winter. We photograph the crown during inspection and tell you plainly if it can wait. Call (856) 741-9572 for a free estimate.
Do I need a cap if my flue is already capped off?
The abandoned furnace flue still needs protection - an open or poorly sealed cap allows water into the chimney interior, where it damages the shared masonry and can migrate to the active flue. We inspect both flues and quote protection for each.
Chimney Liner & Rebuild in Haddon Heights

When Haddon Heights homes converted from coal to oil to gas, the secondary flues were rarely relined for lower exhaust temperatures. The result is a borough full of multi-flue chimneys with mismatched, damaged, or absent liners that demand inspection on every job. Clay tile liners installed in 1910-1930 have exceeded their service life, and the soft coal-era mortar between tiles has often eroded, creating gaps that leak combustion gases into wall cavities or between flues.
Stainless Steel Liner
Signs you need it
Clay tile pieces in the firebox, visible gaps between tiles on camera inspection, or a gas appliance venting into an unlined coal flue.
What it costs in Haddon Heights
Stainless steel liner installation runs $2,800-$4,500 for a standard fireplace flue, including insulation and connector fittings.
How we do it
We measure the flue with a video scan, pull a properly sized DuraFlex or Olympia Chimney stainless liner with poured insulation mix around it, and terminate with a listed top plate and rain cap.
Partial Rebuild
Signs you need it
Spalled brick above the roofline, a leaning stack, or mortar joints eroded more than 1/2 inch deep.
What it costs in Haddon Heights
Partial rebuilds from the roof up run $3,500-$7,500 depending on height, scaffolding needs, and matching historic brick.
How we do it
We dismantle to sound masonry, salvage matching brick where possible, and rebuild with Type N mortar appropriate for pre-1940 soft brick, documenting each stage with photos under Haven Standard Clause 4.
What Chimney Liner & Rebuild Costs in Haddon Heights
| Item | Typical range in Haddon Heights |
|---|---|
| Stainless steel liner (fireplace flue) | $2,800-$4,500 |
| Flexible liner (gas appliance) | $1,800-$3,200 |
| Partial rebuild (roof up) | $3,500-$7,500 |
| Full chimney rebuild | $8,500-$18,000 |
Does every old chimney need a new liner?
Not necessarily. We camera-scan first and show you the tile condition, gap locations, and any combustion residue patterns. If the clay tile is intact and properly sized for your appliance, we’ll document that and tell you. Call (856) 741-9572 for a free inspection.
Can you match the brick on a 1920s chimney?
We source through Haven’s buying network and maintain relationships with regional suppliers for historic brick matching. Close matches are usually achievable; exact matches depend on the original manufacturer, and we photograph samples for your approval before ordering.
Brands We Service in Haddon Heights
We stock and install caps, liners, and repair materials from Gelco, Olympia Chimney, and Famco, with Copperfield specialty items available through Haven’s buying network. Most standard parts arrive within 24-48 hours, keeping Haddon Heights jobs on schedule once the written price is approved.
Pricing for Chimney Cleaning in Haddon Heights, NJ

| Service | Typical range in Haddon Heights |
|---|---|
| Standard chimney sweep with Level 2 inspection | $180-$320 |
| Class III creosote removal (glazed) | $320-$550 |
| Smoke chamber parging | $850-$1,400 |
| Firebox tuckpointing (partial) | $650-$1,200 |
| Damper replacement | $450-$850 |
| Crown repair | $450-$850 |
| Full crown replacement | $1,200-$2,400 |
| Single-flue cap installation | $280-$550 |
| Multi-flue cap installation | $450-$850 |
| Stainless steel liner (fireplace) | $2,800-$4,500 |
| Flexible liner (gas appliance) | $1,800-$3,200 |
| Partial rebuild (roof up) | $3,500-$7,500 |
Prices in Haddon Heights run toward the higher end of these ranges when chimneys require scaffolding for roof access, when historic brick matching is needed, or when abandoned furnace flues must be addressed alongside the active flue. Every job is quoted in writing before work begins - Haven Standard Clause 1, no exceptions.
Neighborhoods We Serve in Haddon Heights
We work across the borough’s original streetcar grid, from the earliest platted sections near the White Horse Pike to the later 1920s expansions. Most Haddon Heights appointments are scheduled within a few days, with dispatch coordinated from our metro office.
- Original Town Center (1895 plat)
- Kingston Historic District
- Highland Avenue corridor
- Seven Stars area
- White Horse Pike vicinity
Service Area - Cities Near Haddon Heights

Our crews serve homeowners throughout the Camden County inner suburbs. We regularly schedule jobs in Audubon, NJ, Barrington, NJ, Mount Ephraim, NJ, and Bellmawr, NJ, with the same written-price-first process and documented photo record on every visit.
Serving Haddon Heights, NJ - Our Local Coverage Area
We’re based in the Haddon Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Haddon Heights

Most chimney cleaning and inspection does not require a permit. Liner installation and structural rebuilds typically do, and we handle permit submission as part of the written scope when required.
We typically book within 3-5 days during shoulder seasons and 5-10 days during peak fall demand. Live phone support is available 24/7 to check current openings.
Yes. We inspect every accessible flue, including abandoned furnace flues, as part of our standard Level 2 inspection. The secondary flue is documented with photos and included in the written report.
Ready for a written price before any work starts? Call (856) 741-9572 for a free estimate. Every job includes a camera-scan inspection, documented photo record, and our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haddon Heights Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A.





Before
After
Before
After
Before
After