Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning & Sweep in Camden: What to Know First
We provide independent DuraFlex chimney cleaning and sweep services in Camden, with most Level 1 and Level 2 inspections completed within 90 minutes and a written price delivered before any work starts. A standard DuraFlex sweep and inspection in Camden runs $189-$329 depending on creosote buildup severity and whether camera access requires liner disassembly. We’re not affiliated with DuraFlex - we’re an independent service provider - which means we source OEM and quality aftermarket parts through our Haven buying network to keep pricing honest. This page is for Camden homeowners with DuraFlex DW, DuraFlex SW, or DuraFlex Pro liners who need annual sweeping, creosote removal, or suspect liner damage after a chimney fire or water intrusion. Call (856) 741-9572 for a free estimate.
How DuraFlex Products Fail - and How We Fix Them
- DuraFlex DW (double-wall) liners develop creosote bridging at the inner-outer wall junctions. The air gap that makes DW efficient also creates a cold spot where pyrolysis deposits harden into Class III glazed creosote - the stuff that won’t brush off with a standard poly brush. In Camden’s row homes near Cooper Street, we’ve found these bridges spanning 8-12 inches after just one burning season when homeowners burn unseasoned oak. We remove it with mechanical whipping heads and apply creosote modifier before the sweep, then document the liner wall condition with camera scan per Haven Standard Clause 4.
- DuraFlex SW (single-wall) liners show accelerated corrosion at the flex-to-rigid transition points. The 316Ti stainless flex meets the rigid tee or thimble, and galvanic reaction plus condensate pooling eats the seam from the outside in. Camden’s freeze-thaw cycles accelerate this - we see it most in homes without rain caps, which is more common than you’d think in Fairview and Cramer Hill. We cut back to sound metal, install a DuraFlex-compatible slip tee or quality aftermarket equivalent from Olympia Chimney, and pressure-test the joint.
- DuraFlex Pro liners suffer mortar packing in the corrugation valleys during initial installation. The deeper corrugations that give Pro its superior flexibility also trap refractory mortar when installers rush the job. Two seasons later, that mortar cracks, spalls, and falls into the smoke chamber - we find it during camera inspection looking like gray gravel. We extract the debris, assess whether the liner still flexes properly for future pulls, and replace sections where the corrugation is locked solid. This is warranty-safe work; we document pre-existing mortar intrusion to protect your DuraFlex warranty if it’s still active.
- DW liner outer wall pinholes from condensate tracking. The outer wall is thinner 304 stainless on early DW production runs, and acidic condensate finds a weld imperfection or handling scratch. You smell it before you see it - a sharp, metallic odor on humid days in Camden’s August. Camera inspection shows staining; we confirm with a light smoke test. Repair is section replacement with current-spec 316Ti outer wall, or full liner replacement if pinholing is systemic. We always quote both options in writing.
- Termination cap separation on all DuraFlex lines after 7-10 years. The draw band and clamp system loosens with thermal cycling, and Camden’s coastal wind loading finishes the job. Caps end up on the roof or in the yard. We inspect the liner top for distortion, replace with a Gelco or Famco cap sized to the actual liner OD (not nominal - DuraFlex runs slightly undersized), and seal with high-temp silicone rated to 500°F continuous. The camera shows it. The report names it. The price is written before we ask for anything.
Our DuraFlex Chimney Cleaning & Sweep Process

- 1
Call intake with live person. We ask your DuraFlex model if you know it, the installation year, and what you’re burning. We schedule a window and text when your tech is en route - Haven Standard Clause 2, Arrive on Schedule.
- 2
Level 2 inspection with camera scan. Corrine Halstead and our crew drop a chimney camera down the full flue length, recording liner wall condition, joint integrity, and creosote class. You watch the feed in real time if you’re home.
- 3
Written findings and price. Condition, measurement, recommended fix, price - in that order. No verbal quotes. No “let me check the truck.” Clause 1 of the Haven Standard: Have it in writing.
- 4
OEM or quality aftermarket parts selection. We stock DuraFlex-compatible components through our Haven buying network, plus HeatShield and Gelco alternatives when they fit better or cost less without compromise. You choose; we document the part source on your invoice.
- 5
Sweep, repair, and pressure test. Creosote removal per NFPA 211, mechanical repair as quoted, then a draft and smoke test to confirm the system draws properly with your appliance connected.
- 6
Documented photo record and warranty. Clause 4 of the Haven Standard requires a photo record on every job - included, not extra. Your 365-Day Done Right Promise is stamped and dated. Cleanup is complete; we leave the work area as found.
Before
AfterWhat DuraFlex Chimney Cleaning & Sweep Costs in Camden
| Service | Typical Range |
|---|---|
| Annual sweep + Level 1 inspection, DuraFlex liner | $189-$249 |
| Level 2 camera inspection + sweep, standard creosote | $249-$329 |
| Class III glazed creosote removal (mechanical + chemical) | $329-$489 |
| DuraFlex section replacement (1-2 sections, labor included) | $580-$940 |
| Full DuraFlex liner replacement, typical row home | $2,800-$4,200 |
What moves the price: creosote class (powdery soot vs. glazed tar), liner accessibility (does the insert need pulling?), and whether we’re repairing or replacing. We do not quote over the phone for repair work - the camera shows what the phone cannot. Estimates are free. Call (856) 741-9572.
Why Camden Homeowners Call Level Two Chimney Camden for DuraFlex Work

We’ve completed more than 38,000 chimney inspections and cleanings since 2009, every one with a written price before work started and a documented record when done. Corrine Halstead grew up in Queens, picked up her first brush at Queensborough Community College, and has spent years reading clay flue tile crack patterns in Camden’s older housing stock - skills that transfer directly to diagnosing DuraFlex liner stress in the same structures.
Our technicians are background-checked, uniformed, and license-displayed. We answer calls live, 24 hours a day. The 365-Day Done Right Promise means if it’s not done right, we make it right - no argument, no runaround. And if another company quoted you liner replacement, bring us their written estimate: our Free Second Opinion costs nothing, and we’ve saved Camden homeowners thousands when the camera showed repairable damage where others saw total failure.
FAQs
No - as an independent DuraFlex service provider, we perform warranty-safe work and document pre-existing conditions to protect any active warranty. We use OEM or equivalent parts and record part numbers on your invoice. If your liner is under DuraFlex’s 20-year or lifetime warranty, we flag potential claims and provide the inspection documentation you’ll need to file. Call (856) 741-9572 to schedule.
Most DuraFlex sweeps and Level 1 inspections take 60-90 minutes; Level 2 camera inspections run 90-120 minutes depending on liner length and creosote buildup. Row homes near Cooper Street with tight fireplace openings sometimes need extra time for insert pulling - we build that into your written price, not surprise you after arrival. Call (856) 741-9572 for a free estimate.
We stock common DuraFlex DW, SW, and Pro repair components through our Haven buying network, and we source from Olympia Chimney and Copperfield for same-week availability on most items. Proprietary DuraFlex factory parts ship in 3-5 business days. We never leave a chimney unsafe - if a temporary cap or seal is needed while we wait, we install it at cost and document the interim protection. Call (856) 741-9572 to check current stock.
The camera decides, not a sales pitch. We look for wall thinning, seam separation, corrosion patterns, and structural deformation - then we show you the footage and explain what each finding means for safety and function. Repair is always our first recommendation when it’s viable; we quote replacement only when the liner fails NFPA 211 integrity standards or when repair costs exceed 60% of replacement. Estimates and second opinions are free - call (856) 741-9572.
Class I and II creosote becomes Class III glazed creosote, which insulates the liner, reduces draft, and can ignite at temperatures as low as 451°F. DuraFlex liners are rated to withstand chimney fires better than clay tile, but repeated thermal shock degrades the metal and voids most warranties. In Camden’s tight row home construction, a chimney fire often breaches adjacent framing before you smell smoke. Annual sweeping costs $189-$249; a fire restoration starts at $8,000. Call (856) 741-9572 for a free estimate.
Written by Corrine Halstead, Owner, Level Two Chimney Camden at Level Two Chimney Camden, serving Camden and nearby areas.





Before
After
Before
After
Before
After